
Wet wiping with foam (manual foaming)
Toremove loose and stubborn dirt from the surface in two steps using a damp cleaning cloth. Suitable for water-resistant, smooth and slightly textured surfaces.
Preparatory work
Select suitable products to match the surface to be cleaned (type / square metres) and the type of soiling.
Put up the warning sign.
Fill the spray bottle with cleaning product in accordance with the dosing instructions.
Main task
Moisten the fittings or surface with cleaning foam and allow it to take effect without allowing it to dry out.
Rinse fittings and surfaces thoroughly with water.
Wipe down fittings and surfaces with a dry cloth. Change the cloth face when it gets dirty.
Replace the cloth once all sides of the cloth have been used. Dispose of the disposable cloth after use.
Wenn alle Tuchflächen gebraucht sind, das Tuchwechseln. Das Einwegtuch nach Gebrauch im Abfall entsorgen.
Perform a visual check.
Final steps
Remove the warning sign.
Dispose of any waste.
Wash the used cloths in the washing machine.
Clean the cleaning materials and replace as needed.
Comments
Wear the personal protective equipment (PPE) required by company regulations, safety data sheets and / or instructions for use.
Always check in advance which product meets your requirements (see Wetrok Cleaning & Care Instructions).
Wetrok AG accepts no liability for damage caused by improper use or incorrect product selection.