Stain removal - Rinsing method

• Select suitable products to match the surface to be cleaned (type / square metres) and the type of soiling.

• Fill the bucket with cleaning product in accordance with the dosing instructions.

• Put up the warning sign.

• Use a plastic spatula to carefully break up and lift any encrustations.

• Thoroughly remove any loose dirt (dry vacuuming or brush vacuuming).

Colour fastness pre-test:

• Spray a small amount of stain remover onto an inconspicuous spot of the surface and leave for a short while to take effect. Then carefully dab it with the white, lint-free cloth. Continue if the surface is colour-fast (the method is otherwise unsuitable).

• Pour a ring of cold water around the stain.

• Pour the cleaning product solution directly onto the stain.

• Work on the stain manually (e.g. with a soft brush or sponge).

• Remove the dissolved dirt and the remaining cleaning solution with the wet vacuum cleaner (wet vacuuming).

• Repeat the process until the stain is removed.

• Rinse the stain with plenty of water while removing it with a wet vacuum cleaner (wet vacuuming).

• As needed: Evenly straighten the carpet pile at the stain location with the soft brush.

• Allow the treated surface to dry completely.

• Empty and rinse out the wet vacuum cleaner.

• Check the power cable for visible damage, clean the cable and roll it up loosely towards the plug.

• Remove the warning sign.

• Dispose of any waste.

• Clean the cleaning equipment and replace as needed.